• Introduction
  • Products
  • Inquiries
  • Customer center
UV Products
Monomer / Oligomer
● Polyester acrylate
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Acid value
(mg KOH/g)
OH value
(mg KOH/g)
Color
(Gardner)
Features
NeoRad P-10 Polyester acrylate 3 750 25~45 < 15 50 < 4 High flexibility and good wear resistance.
NeoRad P-20 Polyester acrylate 4 950 2~5 < 5 60 < 3 Low viscosity and well balanced properties.
NeoRad P-30 Polyester acrylate 4 1,000 0.2~1.0 < 20 70 < 8 Very low ciscosity, fast curing and good pigment wetting. General purpose product.
NeoRad P-41 Fatty acid Modified
Polyester acrylate
4 1,300 2.8~3.2
(60℃)
< 12 40 < 10 Low migratables and low odour. Fast curing polyeseter with good pigment wetting.
Contains about 35% renewable materials.
NeoRad P-60 Fatty acid Modified
Polyester acrylate
6 1,100 7.0~10.5 < 20 30 < 8 Low viscosity pigment grinding vehicle offering good hydrophilic/hydrophobic balance.
NeoRad P-61 Fatty acid Modified
Polyester acrylate
6 1,200 60~75 < 20 20 < 9 Low odour and fast curing polyeseter with good pigment wetting.
ontains About 25% renweable materials.
NeoRad P-65 Fatty acid Modified
Polyester acrylate
6 1,400 6~11 < 10 40 < 9 Low migratable and fast curing polyeseter with good pigment wetting.
Recommended for pigment grinding or property modifier.
NeoRad P-90 Polyester acrylate 3 750 25~55 < 15 50 < 4 Excellent combination of scratch resistance and flexibility.
AgiSyn 705 Fatty acid Modified
Polyester acrylate
4 900 100~220 < 15 < 10 Low extractable resin offering excellent pigment grinding. Based on 35% renewable raw materials.
AgiSyn 706 Fatty acid Modified
Polyester acrylate
6 1,500 7~12 < 20 < 5 Excellent lithographic properties and good pigment wetting.
Recommended for flexo application.
AgiSyn 708 Polyester acrylate 3 2,000 20~40 < 7 < 3 Good flexibility, good adhesion and outdoor durability.
AgiSyn 711 Polyester acrylate 6 1,500 10~50 < 15 < 10 Good pigment wetting and high reactivity.
Designed for lithographic inks.
AgiSyn 713 Polyester acrylate 6 1,500 40~60 < 30 < 3 High abrasion resistance and reactivity.
AgiSyn 714 Fatty acid Modified
Polyester acrylate
6 1,500 7~12 < 20 < 5 Excellent lithograpich properties and good pigment wetting.
Recommend for flexo applications.
AgiSyn 720 Polyester acrylate 4 1,000 0.4~1.0 < 20 < 2 Very low viscosity, good cure and wetting.
AgiSyn 721 Polyester acrylate 4 1,400 4~15 < 15 < 3 Specially designed to enhance pigment wetting in both inks and wetting systems, especially suitable in heigh viscosity systems.
AgiSyn 722 Polyester acrylate 4 1,600 0.5~5.0 < 15 < 3 Specially designed to enance pigment wetting in both inks and wetting systems, especially suitable in low viscosity systems.
AgiSyn 730 Polyester acrylate 4 5,000 15~20 < 5 < 4 High hardness and excellent chemical resistance.
AgiSyn 740 Polyester acrylate 2 6,500 25~35 < 8 < 5 High flexibility and good chemical resistance.
AgiSyn 741 Polyester acrylate 3 2,000 10~20 < 6 < 5 A tri-functional high refractive index oligomer with good flexbility and reactivity.
Recommended for optical applications.
● Chlorinated polyester acrylate
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Acid value
(mg KOH/g)
OH value
(mg KOH/g)
Color
(Gardner)
Features
AgiSyn 710-C60 Chlorinated polyester acrylate diluted with 40% TMPTA 4 1,000 70~120 < 25 < 5 Primer resin offering excellent adhesion to difficult substrates.
AgiSyn 710-G60 Chlorinated polyester acrylate diluted with 40% G3POTA 4 1,000 70~120 < 25 < 5 Primer resin offering excellent adhesion to difficult substrates.
AgiSyn 712 Chlorinated polyester acrylate diluted with TMPTA N/A N/A 100~150 < 5 < 2 Exhibits excellent adhesion on plastics and good offset behavior.
● Amine modified polyether acrylate
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Acid value
(mg KOH/g)
OH value
(mg KOH/g)
Color
(Gardner)
Features
NeoRad P-80 Amine modified polyether acrylate 4 1,000 0.3~0.7 < 1 50 < 2 Very good cure response and chemical resistances.
Recommended as reactivity enhancer.
NeoRad P-81 Amine modified polyether acrylate 2 600 50~100mpa.s < 1 1 < 2 Low viscosity and excellent reactivity booster.
NeoRad P-82 Amine modified polyether acrylate 4 1,000 3.2~3.8 < 1 75 < 1 Very good cure response and flexibility. Recommended as reactivity enhancer.
NeoRad P-85 Amine modified polyether acrylate 6 1,400 300~700mpa.s < 1 40 < 6 Excellent reactivity, good chemical resistance and good wetting.
AgiSyn 701 Amine modified polyether acrylate 4 1,000 2.5~3.5 200 APHA Excellent reactivity, good wetting and flexibility.
AgiSyn 702 Amine modified polyether acrylate 2.5 600 60~120mpa.s < 2 Low viscosity and excellent reactivity booster.
AgiSyn 703 Amine modified polyether acrylate 4 1,000 450`650mpa.s < 2 Excellent reactivity, good chemical resistance and flexibility.
● Acrylics
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Acid value
(mg KOH/g)
OH value
(mg KOH/g)
Color
(Gardner)
Features
NeoRad A-20 Acrylated acrylic diluted with 50% butyl acetate High 30k 0.5~1.0 < 15 150 < 4 Very high reactivity, high hardness and excellent chemical resistance. Excellent adhesion to pMMA.
AgiSyn 260-AB50 Acrylated acrylic diluted with 50% TPGDA & HDDA 2 1,400 14~21 < 1 30 < 2 Primer resin offering excellent adhesion to difficult substrates.
AgiSyn 260-I63 Acrylated acrylic diluted with 50% IBOA 2 1,400 8~9(60℃) < 1 30 < 3 Very good adhesion to plastics and good weathering.
AgiSyn 268-B70 Acrylated acrylic diluted with 50% HDDA 2 35k 3~5 < 1 < 5 Primer resin offering excellent adhesion to difficult substrates.
● Aliphatic urethane acrylates
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Acid value
(mg KOH/g)
OH value
(mg KOH/g)
Color
(Gardner)
Features
NeoRad U-10-15H Aliphatic urethane acrylate
diluted with 15% HDDA
3 2,000 37.5~50.0 < 1 < 10 < 2 High flexibility and toughness.
NeoRad U-10-15T Aliphatic urethane acrylate
diluted with 15% TPGDA
3 2,000 115~150 < 1 < 10 < 2 High flexibility and toughness.
NeoRad U-20-12H Aliphatic urethane acrylate
diluted with 15% HDDA
2 1,200 1.9~2.3(60℃) < 1 < 10 < 1 Excellent outdoor resistance and good flexibility.
NeoRad U-20-20D Aliphatic urethane acrylate
diluted with 15% DPGDA
2 1,300 20~30 < 1 < 10 < 1 Very high reactivity, excellent flexibility and abrasion resistance.
NeoRad U-20-19T Aliphatic urethane acrylate
diluted with 15% TPGDA
2 1,300 25~40 < 1 < 10 < 2 Very high reactivity, excellent flexibility and abrasion resistance.
NeoRad U-20-30W Aliphatic urethane acrylate 6 4,400 1~2 < 8 < 80 < 1 Very good wood highlighting and 15% water up-take ensuring good adhesion to wood. Recommended as primer and stain for wooden substrates.
NeoRad U-41 Aliphatic urethane acrylate 6 800 25~40 < 1 38 < 2 Very high hardness, excellent chemical resistance and scratch resistance. Recommeded for plastic coatings or property modifier.
NeoRad U-42 Aliphatic urethane acrylate 6 800 25~40 < 1 40 < 2 Fast cure, high hardness and good scratch resistance. Excellent adhesion to various plastics.
NeoRad U6282 Aliphatic urethane acrylate 2 1,200 25~40 < 3 < 10 < 2 Easy-To-Matt resin offering easy gloss reduction, flexibility.
NeoRad U6288 Urethane acrylate 3 900 60~80mPa.s < 3 40 < 6 Easy-To-Matt resin offering easy gloss reduction and possible soft effect.
Agisyn 230S1-A85 Aliphatic urethane acrylate
diluted with 15% TPGDA
2 1,200 60~80 < 2 Excellent outdoor resistance and good flexibility.
Agisyn 230S1-B85 Aliphatic urethane acrylate
diluted with 15% HDDA
2 1,200 30~50 < 2 Exellent outdoor resistance and good flexibility.
Agisyn 230SM-Z90 Aliphatic urethane acrylate
diluted with 15% HEMA
2 1,300 80~110 < 2 Methacrylate offering low shrinkage and high toughness.
Agisyn 230T1 Aliphatic urethane acrylate 2 1,500 55~75 < 2 Excellent flexibility and toughness.
Agisyn 230TH Aliphatic urethane acrylate 2 1,700 140~240 < 2 Excellent resilience and flexibility.
Agisyn 230SH-T70 Aliphatic urethane acrylate
diluted with 30% PETIA
6 1,600 400~500 < 2 High hardness, good scratch resistance and moderate flexibility. Excellent adhesion to various plastics.
Agisyn 230A2 Aliphatic urethane acrylate 6 1,000 65`85 < 2 Fast cure, high hardness and good scratch resistance. Excellent adhesion to various plastics.
Agisyn 230A3 Aliphatic urethane acrylate 6 1,000 90~120 < 2 Fast cure, high hardness and good scratch resistance. Excellent adhesion to various plastics.
Agisyn 230A5 Aliphatic urethane acrylate 2 450 6~8 < 2 Excellent chemical and scratch resistance, and very good exterior durability.
Agisyn 231-A70 Aliphatic urethane acrylate
diluted with 30% TPGDA
2 2,100 70~115 < 2 Highly versatile urethane acrylate with tough, flexible films and high adhesion to PVC.
Agisyn 231-T80 Aliphatic urethane acrylate
diluted with 20% TPGDA
2 1,200 90~150 < 2 This aliphatic urethane acrylate gives flexible, tough and non-yellowing films on PVC and parquet.
Agisyn 235 Aliphatic urethane acrylate 3 1,500 40~80 < 2 A tri-functional aliphatic urethane acrylate which gives tough films resistant to stain and abrasion. It also gives good adhesion to a range of plastics.
Agisyn 236-G75 Aliphatic urethane acrylate
diluted with 25% G3POTA
3 2,000 75~145 < 2 Excellent adhesion to various plastics.
Agisyn 237 Aliphatic urethane acrylate 6 1,000 4~7 < 2 A highly functional aliphatic urethane acrylate that produces non-yellowing films with excellent scratch resistance and adhesion.
Agisyn 238 Aliphatic urethane acrylate 2 2,200 35~80(40℃) < 2 Specifically designed for water soluble screen inks and primer coats on wood flooring.
Agisyn 239 Aliphatic urethane acrylate 6 - 20~40 < 2 Exhibits excellent water soluble ability, could be diluted with high percentage of water.
Agisyn 250 Silicone acrylate 2 N/A 20~60 < 2 Improved substrate wetting and surface slip after cure.
Agisyn 242 Aliphatic urethane acrylate 6 30~50 < 2 Extreme high scratch resistance, high hardness and fast cure. Excellent adhesion to various plastics.
Agisyn 530 Aliphatic urethane acrylate
diluted with 20% BAC
6 2.3~2.9 < 2 High matting efficiency, High reactivity, Low shrinkage with good hardness, Excellent scratch resistance, Excellent Chemical resistance, Excellent heat resistance.
Agisyn 535 Aliphatic urethane acrylate
diluted with 28% Xylene,
n-Butyl acetate
6 1.5~2.1 < 2 Good adhesion, High reactivity, Excellent scratch resistance, Excellent Chemical resistance, Excellent heat resistance.
● Aromatic urethane acrylates
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Acid value
(mg KOH/g)
OH value
(mg KOH/g)
Color
(Gardner)
Features
NeoRad U-60 Aromatic urethane acrylate 2 1,600 4.0~5.2(60℃) < 1 < 10 < 2 Excellent resilience, toughness and flexibility.
NeoRad U-61 Aromatic urethane acrylate 2 1,200 1.2~1.7 < 1 160 < 2 Very high toughness, excellent elongation and low shrinkage. Excellent adhesion to various woods.
NeoRad U-6281 Urethane acrylate 3 900 65~75(mPa.s) < 3 40 < 6 Easy-To-Matt resin offering easy gloss reduction and scratch resistance.
NeoRad U-70 Aromatic urethane acrylate 6 800 25~35 < 1 40 < 2 High reactivity.
AgiSyn 670S1-A80 Aromatic urethane acrylate
diluted with 20% TPGDA
2 1,200 40~60 < 2 Excellent toughness and flexibility.
AgiSyn 670T1 Aromatic urethane acrylate 2 1,600 270~330 < 2 Excellent resilience, toughness and flexibility.
AgiSyn 670TH-A80 Aromatic urethane acrylate
diluted with 20% TPGDA
2 1,600 10~30 < 2 Excellent flexibility and hydrolytic stability.
AgiSyn 670T2-A60 Aromatic urethane acrylate
diluted with 40% TPGDA
3 1,300 20~40 < 2 Excellent hardness and durability.
AgiSyn 670T3-A80 Aromatic urethane acrylate
diluted with 20% TPGDA
3 3,000 70~100 < 2 Excellent hardness and durability.
AgiSyn 670A2 Aromatic urethane acrylate 6 950 24.5~32.5 < 2 Fast cure, high hardness and good scratch resistance. Excellent adhesion to various plastics.
AgiSyn 677 Aromatic urethane acrylate 2 900 100~140(20℃) < 2 Excellent pigment wetting.
● Epoxy acrylates
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Acid value
(mg KOH/g)
OH value
(mg KOH/g)
Color
(Gardner)
Features
NeoRad E-10 Bixphenol A epoxy acrylate 2 500 1,700~2,300 < 2 240 < 1 Multi purpose resin offering high reactivity, hardness, gloss and good wetting.
NeoRad E-10-20T Bixphenol A epoxy acrylate
diluted with 20% TPGDA
2 500 20~50 < 2 240 < 1 Multi purpose resin offering high reactivity, hardness, gloss and good wetting
NeoRad E-10-30T Bixphenol A epoxy acrylate
diluted with 30% TPGDA
2 500 3.5~9.5 < 2 170 < 1 Multi purpose resin offering mid-viscosity, high reactivity, hardness, gloss and good wetting
NeoRad E-10-50T Bixphenol A epoxy acrylate
diluted with 50% TPGDA
2 500 0.3~0.8 < 2 120 < 1 Multi purpose resin offering mid-viscosity, high reactivity, hardness, gloss and good wetting
NeoRad E-10-20H Bixphenol A epoxy acrylate
diluted with 20% HDDA
2 500 9~11 < 2 240 < 1 Multi purpose resin offering mid-viscosity, high reactivity, hardness, gloss and good wetting
NeoRad E-10-20G Bixphenol A epoxy acrylate
diluted with 20% G3POTA
2 500 80~120 < 2 240 < 1 Multi purpose resin offering high reactivity, hardness, gloss and good wetting
NeoRad E-20 Fatty acid modified bsisphenol A epoxy acrylate 2 550 2~4(60℃) < 3 230 < 3 Multi purpose resin offering excellent wetting, high reactivity, hardness and gloss.
NeoRad E-20-35D Fatty acid modified bsisphenol A epoxy acrylate
diluted with 35% DPGDA
2 550 2.0~2.5 < 3 120 < 3 Good wetting and high reactivity.
NeoRad E-30 Epsidised soya ail acrylate 3 1,000 20~30 < 10 180 < 10 Excellent wetting and leveling. It contains 60% reproducible materials.
Agisyn 1010 Bixphenol A epoxy acrylate 2 500 600~1,400 < 2 < 2 Multi purpose resin offering high reactivity, hardness and gloss.
Agisyn 1010-A75 Bixphenol A epoxy acrylate
diluted with 25% TPGDA
2 500 10~12 < 2 < 2 Excellent sagging and High-gloss and activity.
Agisyn 1010-B80 Bixphenol A epoxy acrylate
diluted with 20% HDDA
2 500 7~15 < 2 < 1 Excellent sagging and High-gloss and activity.
Agisyn 1010-C80 Bixphenol A epoxy acrylate
diluted with 20% TMPTA
2 500 40~72 < 2 < 2 High-gloss and activity.
Agisyn 1010-G80 Bixphenol A epoxy acrylate
diluted with 20% G3POTA
2 500 60~80 < 2 < 1 Excellent litho effect and Excellent sagging and High-gloss and activity.
Agisyn 1030 Bixphenol A epoxy acrylate 2 1,100 11~21(50℃) < 2 < 1 Multi purpose resin offering high hardness and gloss.
Agisyn 2020 Bixphenol A epoxy acrylate 2 1,100 23~35 < 5 170 < 6 Excellent wetting properties. Contains about 75% renewable raw materials.
Agisyn 3020-A80 Bixphenol A epoxy acrylate
diluted with 20% TPGDA
2 1,200 30~50 < 5 170 < 2 Flexible and tough epoxy acrylate offering high reactivity, hardness and gloss.
Agisyn 3050 Bixphenol A epoxy acrylate 2 750 1,100~2,700 < 5 170 < 6 Flexible and tough epoxy acrylate offering high reactivity, hardness and excellent pigment wetting.
Agisyn 3051 Fatty acid modified bisphenol A epoxy acrylate 2 570 160~260 < 2 170 < 2 Multi purpose resin offering excellent wetting, high reactivity, hardness and gloss.
Agisyn 3052 Amine modified bisphenol A epoxy acrylate 2 750 450~550 < 5 170 < 6 Fast curing and adhesion to plastic.
● Amine synergists
Products name Description Func. Mol weight
(g/mol)
Viscosity at
@23℃,(Pa.s)
Amine value
(mg KOH/g)
Color
(Gardner)
Typical
dosage
Features
Agisyn 002 Functionalised amine synergist 1 450 10~30 193~213 < 1 9~12% Multi purpose synergist offering very high reactivity.
Agisyn 003 Functionalised amine synergist 3 500 3,000~4,500 260 < 2 15~20% Highest amine content and excellent reactivity booster.
Agisyn 006 Functionalised amine synergist 2 500 100~120 95~105 < 2 20~25% Low yellowing and spreading.
Agisyn 007 Functionalised amine synergist 1 600 90~110 182~202 < 2 10~12% Multi purpose synergist offering very high reactivity.
Agisyn 008 Functionalised amine synergist 2 500 1,600~2,600 130~140 < 2 10~15% High reactivity and good adhesion.
● Oligomers for Printed Circuit Boards
Products name Description Funcionality Molecular weight
(g/mol)
Viscosity
@23℃,(Pa.s)
Acid value
(mg KOH/g)
Solids Color(Gardner) Tg Features
AgiSyn™ 9720 Modified cresol Novolac acrylate diluted with Carbitol acetate 2 860 35-45 54-58 >60 <6 >150 Single/Dual layer printed circuit board imageable solder mask, high reactivity, high resolution, high hardness, good heat resistance.
AgiSyn™ 9721H Modified cresol Novolac acrylate diluted with Carbitol acetate 2 11000-14000 17-21 44-48 62-66 3-5 >150 Single/Dual layer printed circuit board imageable solder mask, high reactivity, high resolution, high hardness, good heat resistance.
AgiSyn™ 9750 Bisphenol A epoxy acrylate diluted with DEGDMA monomers 2 1700 15-25 <3 100 <3 >150 Single/Dual layer printed circuit board UV curable solder mask, excellent adhesion, low ahrinkage, solvent free.
AgiSyn™ 9760 Modified phenol Novolac acrylate diluted with TMPTA monomers 2.5 500 15-25 <2 100 <5 >150 Single/Dual layer printed circuit board UV curable solder mask, excellent adhesion, high reactivity, solvent free.
AgiSyn™ 9771 Modified anhydride acrylate 1 950 4-9 180-200 100 <3 66.37 Single/Dual layer printed circuit board etching resist ink, excellent resolution, good chemical resistance.
AgiSyn™ 9788 Modified epoxy acrylate diluted with Shellsol A150 and Carbitol acetate 2 1800 30-60 60-70 >50 57 Solder mask of flexible printed circuit board, excellent adhesion, high resolution, excellent flexibility.
AgiSyn™ 9788C Modified epoxy acrylate diluted with Shellsol A150 and Carbitol acetate 2 1600 9.5-15.0 40-50 >50 50 Solder mask of flexible printed circuit boardexcellent adhesion, high resolution, excellent flexibility.
AgiSyn™ 9790 Acrylate copolymer resin diluted with a Carbitol acetate >2 10000-20000 22-32 35-40 >50 <3 >150 Single/Dual layer printed circuit board etching resist ink/imageable solder mask, high reactivity, high resolution, high hardness, good chemical resistance,low odor.
AgiSyn™ 9790HA HA Acrylate copolymer resin diluted with a Carbitol acetate >2 8000-18000 10-18 79-85 >45 >150 Single/Dual layer printed circuit board etching resist ink/imageable solder mask, high reactivity, high resolution, high hardness, good chemical resistance.
AgiSyn™ 9790PC-2 Acrylate copolymer resin diluted with Carbitol acetate, PGME and PGMEA >2 25000-35000 25-35 34-38 >50 <3 >150 Single/Dual layer printed circuit board etching resist ink/imageable solder mask, high reactivity, high resolution, high hardness, good chemical resistance,low odor.
AgiSyn™ 9792 Acrylate copolymer resin diluted with Carbitol acetate, PGME and PGMEA >2 10000-20000 15-25 43-47 >49 >150 Single/Dual layer printed circuit board etching resist ink/imageable solder mask, high resolution, high hardness, good chemical resistance, low odor.
Yuwon Intec.,Ltd, Cheong Woo B/D 4F, Gumjeong-Dong #177-1, Gunpo-Si, Kyungi-Do, Korea.
Customer Service : +82-70-7010-6730 | Fax: +82-31-629-6730 | E-mail :webmaster@yuwonint.com
COPYRIGHT (C) 2016 YUWON INC. ALL RIGHTS RESERVED.